FP9-C40PV 1000V 3P Surge Protection Device(SPD)
FP9-C40PV 1000V 3P Surge Protection Device(SPD)
APPLICATION：
This DC surge protective device is applied low voltage standard IEC EN 61643-11 to protect against DC power line system and other equipment from over-voltage and instantaneous over-voltage damage. Widely used in photovoltaic comber box, power inverter, DC distribution cabinet, etc. It has the advantages of a large discharge current, fast response time, and low residual voltage. Max. PV voltage up to UCPV ≤1000V dc.
MAIN FEATURES：
1. High discharge capacity, quick response, module pluggable;
2. Fast response time, din rail installation;
3. Double thermal disconnection devices, provide more reliable protection; 4. Green window means normal, red means defect, need to change module;
5. Remote alarm terminal optional.
6. T1+T2 surge protection.
| Kind of Equip.: | Surge Protector (Surge Protective Device) |
| Location category: | Indoor |
| Number of ports: | One port |
| Method of mounting: | Fixed, 35 mm DIN rail acc. to EN 60715 |
| Max. backup fuse | / |
| Short-circuit current rating(ISCPV) | 2 kA |
| Residual Current(IPE) | DC 0.3 mA; AC 0.3 mA |
| Type of current: | AC |
| Test Class: | T1+T2 |
| Nominal discharge current(In): | 20kA |
| Max. discharge current (Imax): | 40kA |
| Max. impulse current (Iimp) | 6.25 kA |
| Total discharge current for Mutipole SPD(Itotal) | 12.5 kA(10/350); 40 kA(8/20) |
| Max. continuous operation voltage (Ucpv): | DC 1000V |
| continuous current for PV application ICPV: | 0.2 mA |
| Voltage protect level (Up): | 3.6 kV |
| Modes of protection | + to -, + to PE, – to PE |
| Application system | PV system(Earthed and Unearthed (both)) |
| IP code | IP 20 |
| Temperatures/humidity | -40 ℃ to +70 ℃， 5 % to 95 % |
| Remark: | OCF |
Relevant Products