Dual Power Automatic Transfer Switch, High Sensitive Response Circuit Breaker Changeover 220V (100/4P)
About this item
Silver contacts :The use of silver contacts can greatly improve the conductivity and service life of the product
Easy to use :Built in regular standby opening output port, which can be connected with indicator light, which is convenient for observation outside the cabinet
Good performance :Using high quality flame retardant plastic material, good insulation, high temperature proof, anti aging, safe and reliable
Safety first :When the normal power supply is abnormal, the backup power supply will work immediately to ensure the continuity, reliability and safety of the power supply
Suitable for :Suitable for switching to the backup power supply when the power is cut off, and switching to the main power supply when the power comes in
Specification:
Item Type: | Dual Power Automatic Transfer Switch |
Model: | FEQ5-100/4P |
Material: | Plastic |
Product Dimensions : | 0.39 x 0.39 x 0.39 inches; 1.57 Pounds |
Purpose: | Switch to the backup power supply when the power fails, and switch to the main power supply when the power comes in |
Working Frequency: | 50-60HZ |
Rated Current: | 100A |
Rated Voltage: | AC110-230V |
Working Voltage: | AC220V |
Operation Mode: | Automatic and manual |
ATS: | CB level |
Conversion Time: | ≤0.05 (S) |
Number of Poles: | 4P |
Package List: | 1 x Dual Power Automatic Transfer Switch,1 x User Manual |
How to Use:
· 1. Place the automatic transfer switch of the dual power supply on the debugging platform, and connect the corresponding power line according to the correct phase sequence. The phase line and the neutral line are connected in position, and the wrong connection is not allowed.
· 2. When debugging the three-pole switch, the common and spare neutral wires should be connected to the neutral terminal (NN and RN) respectively.
· 3. Set the dual power supply automatic transfer switch to work in the self-turning and self-resetting mode. If the voltage of the two power supplies is normal, the switch should be placed in the common power supply position, and the common power supply is closed.
· 4. Set the common power supply NA, NB, NC, NN for any phase loss, the dual power supply should be automatically converted to the backup power supply, if the common power supply returns to normal, it should be converted back to the common power supply
Relevant Products